Age of Adepts

If you want to make a Sorcerer Artifact item for summon Earth Magic Puppet, you can’t do it in your home. So out of the house, Grim rushed to the alchemy lab in the 3 building.

Spending 3 Knowledge points and 30 gold coins, Grim got the most accurate time of the Alchemy 3 hours. This price almost occupies nearly half of Grim’s capital reserves, and if it is not to guarantee the success rate of his first Puppet Creature, he is absolutely reluctant.

Neat floors, sleek walls, walls surrounding the stone chamber are filled with each and everyone wooden shelves, with a variety of items stacked on top. Labeled bottles and jars contain some commonly used Witchcraft materials. The element Magic wand is used to detect the item elemental attribute. The set of metal armor is used to test the Sorcerer Artifact formidable power… In addition, There are also many ancient Monster products that Grim can’t say for specific purposes.

However, these are not the focus of Grim’s attention. He is most concerned about the magical Alchemy table that shines in the center of the stone chamber.

A metal chain hangs from the top of the room, with one after another illuminated stone at the end. Eight vertical chains and eight lighting stones make the Alchemy table a circle. In this way, the operator will not be disturbed by the shadow when the concentrate item is completely refined.

This is simply a shadowless lamp of the Other World version!

And this magical Alchemy station is actually an industrial bed of the Other World version.

The entire Alchemy station is eight meters long and 4 meters wide. It is high and low, and it is filled with countless precious items that are beyond the imagination of ordinary people. Seriously, this countertop can be divided into sixteen workspaces, each of which can perform a specific Alchemy activity.

An Alchemy Master familiar with Alchemy’s operational processes is fully capable of performing an envisaged Alchemy experiment with a smooth flow of fluids. For strangers, I am afraid that it will take ten days and a half to get familiar with the magic items and equipment on Alchemy’s stage.

But of course, these can’t help but have chip-assisted Grim.

“Chip, start scanning the Alchemy station and develop the process plan for the Alchemy experiment!”

*Beep*, the task has been created…the scan job starts…”

As the blue glow of Grim’s fundus flickers, the utensils, items, facilities, and the magic machinery and rune array hidden inside the Alchemy table are all scanned into the mind.

Through past knowledge reserves and on-site scanning operations, most of the facilities and items on the magical Alchemy stage were recorded in the chip database and then projected onto the Grim’s retina as data annotations.

Now as Grim’s line of sight moves on the Alchemy stage, whenever a quirky, mysterious item or device enters his line of sight, a clear and unambiguous note appears next to the item on the retina.

This is a working machine that combines all the Alchemy methods!

A high-magnification magnifier, mounted on a movable robotic arm, is never the hard-wearing lenticular lens on Earth, but a lens etched with a special sorcerer array. Grim chose the highest standard alchemy lab, so the Magnifier’s magnification is between 5 and 300 times. If you switch to the ordinary alchemy lab, then this magnification is probably only up to 150.

This is especially mentioned because most of the Sorcerer Artifacts need to be micro-carved when they are made. That is, it is necessary to engrave several or dozens of independent and closely connected sorcerer arrays at a certain local position of the refined Sorcerer Artifact. And some of the clever Alchemy Master can even engrave hundreds of sorcerer arrays on a fist-sized ruby.

Grim, as the initial Scholar, does not have the great ability to do this, so he only needs to engrave 7 sorcerer array on a finger-sized monster Heart Nucleus.

Summon rune is a must, this is the basic rune of summon out of Earth Magic Puppet, and also every summon Sorcerer Artifact.

Elemental Life also has to give the sorcerer array. This can be used to build an Elemental Transformation body for Magic Puppet with Witchcraft strength, while the material is soft earth.

The imprinting control system is the most important thing. In the refining process, Grim’s own soul brand must be left. Only the Earth Magic Puppet from the summon can follow the instructions of Grim’s.

In order to allow the magic Puppet from summon to manipulate the body of Elemental Power, the necessary energy nodes and energy circuits must be outlined. This can be related to the magic Puppet’s mobility and combat effectiveness.

Of course, such a difficult rune technology Grim is ignorant, but fortunately there is a chip to help him complete this part of the design and optimization work, so he will only need to work more than the gourd scoop.

Even so, Grim’s work is still unimaginable.

In the past years of 6, Grim had only a few times of Alchemy experience, and still worked on some elements of purification and scented extracts. Therefore, seriously, he still has to be a rookie newcomer in Alchemy’s profession.

But today, he is not at all trying to practice.

Because there is only one monster Heart Nucleus!

Once it fails, his future Magic Puppet army plan will be stuck in First Step.

…………

Grim stood in front of the Alchemy station for a quarter of an hour without any action, and in his mind, the chip has used the scene simulation method to repeat the process of refining the Magic Puppet Heart Nucleus several times until he wrote down. All the obstacles and details are counted.

Grim took a moment and finally got the action.

He took a Black Magic Iron from his pocket and threw it into a shack. The next second, his Spiritual Force skillfully penetrated the Alchemy console’s control sorcerer array. 嘭a light sound, a cluster of stable and hot elemental flames burning underneath.

If there is no magical Alchemy station, he needs to use the elemental flame to heat and melt the Black Magic Iron. In this process, he needs to maintain a stable output of the Fire Element for more than a quarter of an hour, otherwise the complete melting of Black Magic Iron will not be possible.

Now with the Alchemy station, he only needs to start the hidden sorcerer array under Alchemy, then the Alchemy device will automatically heat the melting Alchemy item according to his set temperature and time. While waiting for the Black Magic Iron to melt, he can be distracted to do some other preparations.

This fully demonstrates the advantages of the Magic Alchemy station.

The Heart Nucleus, which was removed from the head of Simba, was suspended above the Alchemy table. Grim adjusted the magnifying glass to the proper position and the appropriate degree, which was slow and ready for micro-engraving equipment.

For the micro-carving work is a special Sorcerer Artifact. By injecting different sizes of Sorcerer Power into the inside, a thin mosquito fly can be created. This kind of laser has been specially modified and adjusted by Alchemy Masters. Although it is weak, it has powerful cutting ability.

Not to mention the ordinary magic metal, such as Octave Gold, Underground Essence Metal, and Khorium, which are harder than the special metal imagined by the ordinary person. The laser can also easily engrave the lettering and draw rune.

What Grim needs to do now is to use this set of equipment to micro-sculpt 7 rune sorcerer array on the finger-sized Heart Nucleus, in which summon rune sorcerer array, will imprint sorcerer array one, Elemental Life gives sorcerer array one, energy Four nodes, a few energy circuits…

Easily said than done, Grim calmed his mind, put his eyes under the magnifying glass, and finally began his long-awaited work.

Under the 300 magnification effect, the Heart Nucleus, which was originally sized and polished, became a behemoth full of coarse particles. Under the guidance of the chip, Grim manipulated the sorcerer array and adjusted the Heart Nucleus to the most appropriate position and angle, which activated the laser’s sorcerer array.

As a laser with a thickness of only 10% is placed on the Heart Nucleus, the light dot is projected to become red and soft, and is gradually burned out to a pit that is only a quarter of the diameter of the hair. Then Grim uses the Spiritual Force to push the laser slowly over the surface of the Heart Nucleus, and a regular line appears.

Under the global planning of the chip, where should it be etched, what is the depth of the etch, all of which are labeled with Grim of different colors. What Grim needs to do is to use the Spiritual Force to control the laser’s sorcerer array, and carefully follow the line and speed identified by the chip.

The criss-crossed, wand-like Witchcraft rune is etched by each and everyone, and then surrounded by each and everyone’s singular ring, with four corners leaving the necessary energy nodes, with a consistent energy loop in the middle… …

After a full hour and a half of focus micro-carving, 7’s designed sorcerer array forms a perfect three-dimensional sorcerer array around the Heart Nucleus surface.

Finally, the First Step work is done.

The next step is to use the patiently meticulous sorcerer array to work.

The previous micro-carving just outlines the lines of the sorcerer array, but the gathered magic energy cannot flow in the spontaneous line pits, so this time you need a kind that can match the magic energy and guide the energy conduction. The medium is there.

And this medium is the Black Magic Iron melt that is already in the molten state.

Of course, if you switch to the official Adept of rich and imposing, the melt that acts as the medium should be replaced by Mithril. Grim doesn’t have the financial resources and resources to replace it with the lowest-end Black Magic Iron.

Although there will be no small loss in energy conductivity, it is completely sufficient for a low-tech Earth Magic Puppet.

It was another hour of long hours, and Grim continued to consume his own Spiritual Force. Although the Spiritual Force output at every moment is very weak, but this time for a long time, it also makes his forehead straight, sweating but no chance to wipe.

Using the sorcerer array, the liquid Black Magic Iron is liquefied into a filament, little by little, poured into the etched pit of the laser, where neither cracks nor spills occur. This difficult work for a Novice apprentice It is a great miracle that cannot be accomplished.

However, Grim has turned the miracle into a real reality with the help of the chip’s Powerful.

When the last trace of Black Magic Iron melted in the pit, Grim cut off the sorcerer array, pushed the magnifying glass in front of him, and silently watched the Magic Puppet Heart Nucleus suspended on the platform. At this moment, his heart was choppy, the waves were ups and downs, and his eyes could not help but get wet.

His ideal first Magic Puppet is done!