Doomsday Bunker Upgrade

Finally, with the help of the simplified machine and a few miners equipped with exoskeleton, the stuck Titan finally got out of trouble, and the test was resumed smoothly.

But this time it is the driver, not the miner, who drives the prototype Titan.

After all, it is a real Titan, and it must be professionally trained to be able to drive it. It cannot be played by ordinary miners.

Seeing the mining efficiency of the real Titan, both the miners and the technicians in the mine are full of praise for this large machine, especially when they see that the Titan can continue to break the rock wall while still using the two lower abdomen. The mechanical Daao kept stuffing the ore into the mine cabin behind his stomach, which made their eyes brighter.

Although the development of modern science and technology has allowed the industrial and mining industry to break away from primitive and arduous manual labor, in this general environment, this mine still uses a relatively primitive manual labor mode.

Workers use pneumatic picks to destroy the structure of the rock wall, breaking it into ore, and then manually load the ore onto the mine cart, and then transport it from the ground to the ground.

It’s not that mines don’t want to use new technology, but that they really don’t have the money to purchase new mining equipment. Although the country is also vigorously organizing production, this kind of stuff is always in short supply. The factory produces it and uses it in the important mines first. Such a small mine with a small amount of mining can only rely on pneumatic picks with manpower.

This has no other advantages. The only advantage is the low labor cost and cheap equipment.

But this does not mean that people on the mine do not want to have good labor tools that can improve their labor efficiency.

Just looking at the prototype, although the workers' eyes were bright, the technicians could only give up the idea of ​​buying this after a wry smile in their hearts.

Of course he can see that the prototype is good, but he can also see how expensive the prototype is. Even if this kind of valuable item is actually mass-produced, it is not something their small mine can afford.

In contrast, he felt that the simplified machine seen below is more likely to be equipped for mines.

"Master, do you think the two big clips for picking up ore are necessary?" Chen Xin found the foreman before and asked him.

The foreman carefully stared at the two big ao under the prototype, and then he nodded seriously to Chen Xin and said, "It is necessary. With this, we can keep drilling without stopping to pick up ore."

Obviously, the foreman is very satisfied and yearning for this design that can save a lot of things.

However, he also understood that prototypes were not something they could be worried about, and added: "Actually, I think the previous one is quite good. It would be great to improve the design. Although this is good, it is too big. It is not realistic to use underground."

Hearing what the foreman said, Chen Xin glanced at the huge prototype in front of him, thinking that it would have been stuck in the tunnel just now, it was hard to disagree with the foreman's words.

He thought about it for a while, and felt that it was indeed the case. The huge Titan is huge, even if the mining type is deliberately reduced in size.

Compared with the simplified machine, which is basically the same structure and volume as the exoskeleton, and compared with the height and size of the prototype machine, Chen Xin also thinks that a smaller machine is more practical in mines.

After all, in a narrow mine tunnel, once a mainframe like a prototype gets stuck, the impact will be comparable to a mine disaster.

The simplified machine is different, the relatively small structure also brings lighter weight, so that it can not delay things due to the large size when encountering danger.

So after this field test, Chen Xin already had an idea for the mass production of mining Titans.

After the test in the mine, Chen Xin and his team returned to the research center.

The huge prototype was naturally driven into the warehouse and was still on standby, but the simplified machine was dragged to the laboratory, ready to put the ideas just generated into practice immediately.

The mechanical arm that had been dismantled was added back, and the mine bucket reopened an entrance to the mine. It was placed in the middle of the two mechanical arms, which looked like the front face of a crab.

Seeing this design, Chen Xin didn't hesitate or hesitate for long, so he killed the design draft.

This kind of look is to add back the original design, which only solves the current problem, but does not solve the previous problem. Otherwise, the design sketch that Chen Xin sees will not just copy the design of the prototype. .

However, although the manuscript was killed, Chen Xin gave his plan.

"It's good to design the two robotic arms to be able to flip one hundred and eighty degrees." Chen Xin directly modified the performance on the design drawings submitted by the researcher, and said: "You don't need to be stuck with the mouth from below. Put it in, turn the robotic arm over 180°, and throw it into the ore bucket! What we build is an industrial machine, and it doesn’t need to be too novel or high-tech design, it can run smoothly, or just solve the problem. Very good."

Upon hearing this, the researcher suddenly felt a sense of being broadened. At the same time, he also understood that Chen Xin's method of directly turning the robot arm 180° was far simpler, more straightforward and rude than his own idea of ​​opening the door on the mine bucket. , But it also solves the problem that workers need to bend over many times a day and the ore in the mine bucket will slip off.

"The academician, can this be finalized production?" Looking at the design drawings that have been altered by Chen Xin, the researcher asked Chen Xin.

Because in the past, Chen Xin’s design is always ready for mass production. UU Reading www.uukānshu.com Chen Xin rarely revises his own design many times, so the researcher has this question.

However, Chen Xin did not answer this question, but shook his head at him.

"After the first modification, make a few prototypes, send them to the previous mine, continue testing, and record all the workers' feedback after using them." Chen Xin instructed the technicians, but Chen Xin did not answer this question, just Shook his head at him.

"After the first modification, make a few prototypes, send them to the previous mine, continue testing, and record all the workers' feedback after using them." Chen Xin instructed the technicians, but Chen Xin did not answer this question, just Shook his head at him.

"After the first modification, make a few prototypes, send them to the previous mine, continue testing, and record all the workers' feedback after using them." Chen Xin instructed the technicians, but Chen Xin did not answer this question, just Shook his head at him.

"After the first modification, make a few prototypes, send them to the previous mine, continue testing, and record all the workers' feedback after using them." Chen Xin told the technicians, he

　　 Please remember the domain name of the book’s first publication:. 4Fiction Network Mobile Edition Reading URL: