I Have a Store In the World of American Comics

Vol 10 Chapter 5: 0 steps through Yang - in!

equipment:

Colt M1911 pistol, ammo remaining: 30 rounds.

Infinite ammo "Colt M1911" A1 version.

Competition grade modern compound bow, arrows: 90 rounds.

——————

Infinite bullet "Colt M1911", attributes:

Cartridges used: (.45ACP) .45" Colt pistol cartridge.

Automatic mode: The barrel is short recoil.

Locking method: hinged barrel offset locking.

Launching method: single-action launch.

The mass of the whole gun: 1.13KG.

Full gun length: 219mm.

Barrel length: 127.8mm rifled, six, right-handed, wrap distance: 406mm.

Loading capacity: 7 rounds, muzzle velocity: 250m/s, muzzle kinetic energy: 477J.

Combat rate of fire: 35 rounds/min, caliber: 0.45 inches (11.43mm)

Muzzle velocity of warhead: 247m/s

Effective range: 50m

Aiming Baseline Length: 164.4mm

Equipment requirements: 8 points of strength, 3 points of agility, and more than 3 points of constitution.

Skill:

Reduced recoil: The specially designed barrel can reduce the recoil generated by the infinite bullet "Colt M1911" gun by 0.6%.

describe:

After World War I, the U.S. Army Ordnance Department evaluated the combat performance of the M1911 pistol and asked Colt to make improvements. Colt's improvements include:

(1), widened the sight, and developed the Patridgesight.

This is a gun sight with a flat-head thick blade front sight and a square or rectangular notch rear sight. It was invented by Partridge, who was the president of the American Revolver Association. aim.

(2) Lengthen the hammer to make it easier to be pulled by the thumb;

(3), shorten the distance of the button and increase the anti-skid pattern;

(4) The back of the handle is designed to be arched, and the surface is increased with anti-slip patterns, so that the shooter can hold it more firmly;

(5) Change the mesh anti-skid pattern of the handle guard to make the grip more comfortable;

(6) The thumb groove is added to the rear of the trigger to make the action of pulling the trigger easier;

(7), lengthen the handle insurance.

These improvement projects were completed in 1923, and the new gun that passed the test was officially adopted by the US military on June 25, 1926, and was renamed the "0.45-inch caliber M1911A1 automatic pistol".

Since then, the gun has hardly undergone major structural changes.

In addition, there are many foreign companies or governments authorized by Colt-Browning to produce M1911 models of different calibers.

However, the improvement of point 4 is actually subject to some controversy.

The arch design of this arc improved by M1911A1 was because the military believed that soldiers with insufficient training had a low muzzle when shooting (related to the insufficient tilt of the grip), so this arc design was added to make the hand When extended naturally, the barrel is closer to level.

But not many people agree with this change. Most skilled pistol shooters agree that the straight back plate does not affect their shooting accuracy, the grip does not feel unnatural, and the straight back plate makes the overall appearance of the gun more concise and beautiful.

So although after the end of World War II, most of the M1911A1 on the market are still curved.

However, after decades of development and natural elimination, major gun factories have found that consumers tend to prefer straight shapes. Therefore, today, most of the 1911-style pistols newly produced on the market are designed with M1911 straight backs, while the curved backs Plates have become a name that exists only on modding parts lists.

During World War II from 1941 to 1945, the US military plus other allies ordered a full 2.5 million (including M1911 and M1911A1).

In order to deliver on time, the U.S. government has added four contractors to share production tasks.

The material of the M1911Al grip guards produced during the war was changed from the original walnut wood to brown plastic.

By the end of the war, the U.S. Army alone had 2.7 million M1911s and M1911A1s.

After the end of World War II, the M1911A1 pistol went through the Korean War, Vietnam War, the M1911A1 is still widely used, and there are some other forms of modification, such as the shortened M15 Commander, different lengths, grips and other accessories The MKIV series of government pistols, etc., in addition to a variety of different match pistols.

In 1985, the U.S. military decided to replace the M1911A1 with a 9mm caliber M9 automatic pistol produced by Beretta.

When the congressional order was promulgated, the U.S. Marine Corps vehemently opposed it, and many special forces within the U.S. Army, Navy, and Air Force continued to use the M1911 as an auxiliary weapon, and many still believed that the M1911 was the best combat pistol.

Although the US Army's standard pistol has been replaced by the yes M9 pistol, various M1911 pistols are still produced by many companies.

Due to its unparalleled absolute lethality and precise and rapid single-action shooting mode of its large-caliber ammunition in actual combat, some elite military and police forces in the United States (such as SWAT) have always listed it as a standard pistol for special operations members.

U.S. special forces fighting in Iraq and Afghanistan still use the M1911 pistol, which is almost identical to the design of the last century.

The M1911 has undergone a dramatic revival, with special forces and police departments ditching the 9mm caliber pistols that were widely available in the 1980s and 1990s in favor of the .45ACPM 1911, a caliber that was once considered outdated.

Today, the world's largest M1911 pistol manufacturer, Kimber (KIMBER), produces the "Desert Warrior" government M1911 pistol, which is specially customized for the Navy Task Force under the US Special Operations Command.

——————

Competition grade modern compound bow, attributes:

Use arrows: 90% carbon body iron head.

Fire Alchemy: Single-action fire.

Loading capacity: 18 rounds, muzzle velocity: 100 ~ 360m/s.

Effective range: 100 steps (1 step is about 0.6 to 0.9 meters).

Equipment requirements: 5 points of strength, 5 points of constitution or more.

Skill:

"Hundred Steps Wearing Yang-Zhong"! , passive, cooldown 0.3 seconds, triggered when a long-range attack on a unit within range, making this long-range attack a sure hit.

describe:

Notes on using the bow:

The first point is that if the bow cannot be opened without an arrow, it will shorten the service life of the bow piece and bowstring, and even cause permanent damage to the bow piece and bowstring, and the bowstring detaches from the pulley.

And may cause a safety hazard to the shooter himself and others.

The second point is to regularly wax the special bowstring. The bowstring~www.wuxiamtl.com~ includes the main string and the auxiliary string (also known as the cable), which should be waxed regularly to promote the lubrication between the strings and fibers and prolong the life of the string cable. .

The method of waxing is to first clean the dirt on the string cable with a dry cloth, then wipe the string wax evenly on the string, and then quickly rub the bowstring with a dry cloth.

It is recommended to apply a wax after 1-2 weeks of peak use.

The third point is to replace the strings and cables regularly: the life of the strings and cables of the compound bow is shorter than that of the bow pieces.

Bows and other equipment should be inspected and maintained frequently, and any defective equipment should be repaired and replaced in time before use.

The fourth point is that before using the bow, make sure that all parts are installed properly and firmly, otherwise it will easily lead to the loss of personnel and bow equipment.

......

To be continued

Please recommend, subscribe, and collect.

New book, new book, please support.

Chapter 006 Announcement of the Infantry Legion Summoning Teleportation Scroll

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like