Because this polymer liquid is not toxic, everyone dressed casually, just put on a white lab coat.

Several senior leaders of Sanshi Technology have gathered in front of some samples that were made before. Everyone was very curious. They cut the sample with a knife, cut it with scissors, and even burned it on an alcohol lamp. There was no damage at all.

One of the doctors put his hand into the glove of the high-oxygen airtight box, grabbed a spray gun inside, and carefully sprayed the liquid material on the white cotton cloth. This time, only one side was sprayed.

Under the high-brightness spotlight, the camera in the box displayed the operation process on the large screen next to it.

Within 10 seconds of waiting for curing, you can see that the cotton cloth has undergone some obvious changes. The originally rough surface has now become smooth, and there is also reflection under the light.

Next to Professor Huang said: "This material has self-smoothing properties, and its surface tension is relatively large, so it will produce an absolutely smooth surface while curing. If you rub the surface with different materials, you will find that Its coefficient of friction is very small. If you use the same material to fit the surface, under the action of van der Waals force, you need enough force to be able to tear it again.”

Zhou Lei asked, "Professor Huang, what about the shear strength and flame retardant effect of the material?"

"Mr. Zhou, the tensile strength of a single material exceeds that of 45# steel of the same thickness, and the test time is 10 seconds on cotton cloth sprayed with 0.1mm thick material. It will not deform at 800 degrees, and the flame will not burn when it exceeds 1200 degrees. , we have done extreme testing, and it will start to smoke at a temperature of 2000 degrees, but there is no open flame."

"Then if I use it to make fireproof clothing for firefighting, will it be far beyond the national standard."

"That's right, but Mr. Zhou, a material like yours can be used in higher-grade places, so why use it in firefighting suits?"

Zhou Lei talked about his cousin's uncle, which made everyone in the laboratory awe-inspiring. This is the consciousness of an entrepreneur with social responsibility.

Respect for life is also the bottom line of a person with correct three views.

"We will help you." Several doctoral students who were still enthusiastic young people said that Professor Huang had seen too much, too many entrepreneurs were impassioned in front of others, and unpredictable in the back, but he did not stop his students, after all, this is also interests are in it.

"Thank you everyone." Zhou Lei was very grateful.

After sealing the laboratory data, he went directly to the law firm with the patent application materials and asked them to help submit the patent application.

In addition, the negotiation of the chemical plant was accelerated. After Sanshi Technology continued to increase the price by 5%, the business owner let go.

The funds were quickly in place, and the factory became Zhou within a few days.

Most of the equipment has been harmless and sold to other chemical plants in the mainland.

Then, Professor Huang was invited to design a fully automated chemical production system according to the production process. For the time being, only this polymer liquid material is produced here.

For Professor Huang, this simple production process is just an ordinary job for the doctoral students in his team, and the millions of design fees go directly into his pocket.

In addition, relying on Professor Huang's approach, the approval process was expedited. This kind of chemical plant renovation requires an EIA, which is extremely troublesome. Although you have met the standards, a slight delay in their approval time will cause your work period to be seriously overdue.

On one side, the waste equipment is pulled out, and the other side is the construction vehicle. Most of the raw material tanks are in the open air, so it is more convenient to install. Some equipment that requires high purity is placed indoors, and the workshop has been re-processed without dust.

The final filling is in the original filling workshop, where the transformation is relatively small. In addition, a large number of high-pressure 100-liter steel cylinders have been customized.

A not too well-known fire equipment factory has also changed its ownership. Recently, Zhou Lei spent money at all costs, and Gao Xiaohua has said several times that impulsive consumption is too frequent.

Fortunately, it was a sole proprietorship company, so it was directly ignored, and the boss had the final say. Under Zhou Lei's persuasion, Gao Xiaohua helped him mobilize funds as much as possible.

After a long period of equipment debugging and trial production, it is expected that the production of fire fighting suits will officially start at the end of June.

One day at the end of May, a middle-aged man came to Zhou Lei's office. He didn't know where he got the news. He asked for 100 barrels of liquid materials.

The material isn't even named, just the lab's project codename "High Score One."

"Mr. Chen, where did you get the news? You must know that we haven't even started production. We can't provide it to you for the time being."

"Mr. Zhou, if you are worried, you can call Professor Huang." Mr. Chen said not at all surprised.

Sure enough, those who wear glasses are unreliable, gentle scum, fortunately signed the contract, otherwise he will swallow the whole project, Zhou Lei muttered in his heart.

But he had misunderstood Professor Huang. He had already submitted the paper, but it was temporarily suppressed by the above. Some high-level reviewers knew that this material was incredible at a glance. Then he warned him not to publish it in domestic and foreign journals for the time being.

In the future, it is also necessary to control the output of raw materials from the three petrochemical plants and not release them to foreign markets. Therefore, Professor Huang has no benefit at all, except for the benefit fee of several million.

In the future, the polymer materials of Sanshi must be manufactured into finished products before they are allowed to be exported. Even the clear production process patent described in his patent has been blurred by some experts

, but does not affect the validity of the patent.

After reporting layer by layer, there is a person who wants to pick up the goods today.

Zhou Lei called Lao Huang, and he said hesitantly on the phone that you'd better give it to them. Zhou Lei is also a good person, why can't he hear what's inside.

At this time, it is the best way to play stupid, try not to contact too deeply.

He agreed with his mouth, but the time needed to wait until the factory officially started. They will also wait for this time. Even after the decision, several approvals came down immediately, including the publication of the patent, which was greatly shortened, and the official patent certificate could be obtained by July.

The entire June passed quickly, and the half-month rainy season also dragged down some construction periods.

The good news is that the Rampu factory has already built all the workshops, with a single-color steel structure inside and hollow brick exterior walls.

After the acceptance, the interior decoration can be carried out, mainly including some dust-free treatment and the installation of the air conveyor between the workshops. The interior design is all ready, just waiting for when the factory will be completed.

The busy days of the past few days made Zhou Lei feel that the next time he inspected the factory, he would never be there.

After signing the acceptance document, Zhou Lei threw the pen away, and then explained to Wang Cong, who was directly responsible for contacting the company that renovated the factory and hurry up. Then, the parts for 2,000 robotic arms were ordered, and they were ready to be installed after the decoration was completed.

The customized assembly line has also been completed. It has been in Party B's warehouse for more than a month, and now it is almost time to ask them to ship it.

So there are many things going on in the factory, and even the expansion of electricity requires you to go to the power company to apply.

It is said that the sister-in-law of the Wang family has opinions. Wang Cong has not returned to his hometown for several months. This is simply outrageous. Fortunately, the summer vacation is coming soon, and the sister-in-law of the Wang family can bring her son here.

Wang Cong was enjoying it. He used to be in charge of a team of dozens of people. He didn't have the power to sign. Now the next move is to go out for hundreds of thousands, and the power will make people intoxicated in it.

The old man went to the construction site more diligently before. Now that the construction site is over, he also rests for a few days, but he is not stable at home, and he is always thinking about the factory.

Several workshops in the west area will be used as production workshops, while the northern part of the central area is also a production workshop, and the several parts in the south are finished product warehouses.

In the future, after the big truck comes in from the main entrance of the Central District, it will stop directly at the warehouse and can directly load the goods. Even a special handling robot arm has been designed, and loading and unloading goods does not require labor at all.

Therefore, there are no human operators in more than 98% of the parts production workshop, painting workshop, assembly workshop, packaging workshop, and warehouse, all of which are one-stop assembly lines. The transfer of finished and semi-finished products is also carried out through the assembly line between the workshops, and no manual forklifts are required to run back and forth.

The only human employees are also used as the second inspector and responsible for the optimization of the assembly line to check for leaks and fill vacancies.

Zhou Lei has stopped going to Chen Lu's place recently. This is not his intention. In addition, he has thrown away the boxes of TT in the car. After this time, he has been able to control himself.

Don't make things too complicated. After Chen Lu called Zhou Lei a few times, he couldn't make an appointment with him, so he was no longer enthusiastic, and the enthusiasm between the two returned to a kind of calm.

Every two weeks, Chen Lu will come to the city to have a meal with Zhou Lei, and there are no other activities. It can be regarded as a relationship.

Zhou Lei was not sure about Chen Lu's thoughts, so this matter was delayed.

On June 6th and 20th, the college entrance examination was over, Yang Xiaoyao was relieved, and she sent away the first-year graduates. The rest is the final exams of the senior one students, and the school will officially close on the 1st and 2nd of October 20th.

Her heart was indescribable, she wanted to be with Zhou Lei, but she was reluctant to bear those students.

But she was very happy to hear Zhou Lei say that she was in charge of the decoration of the house.

Zhou Lei had already gone to Porsche's 4S shop to pick up a Pamela. He knew that Xiaoyao liked this car very much.

On the 2nd of October, Zhou Lei didn't go there. He just waited at home for Xiaoyao's train to arrive in the afternoon. He would go there in advance to pick him up.

Other factories are being renovated in an orderly manner, and the chemical factory is ready to start trial production immediately. The fire equipment factory has been shut down for more than half a month for equipment maintenance, and a production line for fabric spraying has been added.

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like