Refurbishment: Turning Waste into Treasure

"It's really a problem..."

Although Xu Fan had thought of it for a long time, at this moment, he caught the disdain, and only then did he really confirm: "Let's see what kind of trick you are playing!"

"Hi! 35

Under the joint efforts of the two small islanders, a huge canvas was opened, revealing the true face of the lithography machine. The packaging was not very tight. Except for the wooden floor on the chassis, the other packaging was made of transparent plastic wrap. circle it.

In addition to the big logo of Nikang company, the rest is the NSR-S331A of the small one!

Confirmed to be Nikang NSR-S331A lithography machine!

next moment!

[Ding... Detected products that meet the requirements, this product is: Nikang NSR-S331A lithography machine; Quantity: 1! 】

[9.6% new: 30,000; 9.5% new: 20,000; 90% new: 10,000! 】

[Upgrade to Nikang NSR-S411 lithography machine: 86 million; upgrade to Nikang NSR-S600B: 99.5 million; upgrade to Nikang NSR-S866A (Note: The maximum limit can be used to manufacture 14nm chips ): 330 million!]

【Renovation 24】【Cancelled】

66.99

Xu Fan was stunned on the spot, all of a sudden, his face was on his face. There were several reasons.

The first reason is that as soon as you get close, the refurbishment system will display a prompt, which can explain the problem, because on the surface, this NSR-S331A lithography machine is brand new!

That's right, it's brand new, far from the point where the damage exceeds 50%, but even so, the refurbishment system still has a refurbishment prompt, which is enough to show that there is a big problem here.

The second reason is the charge in the column of refurbishment grade. Even if it is the most advanced 9.6% new, the charge is only 30,000 yuan. This also confirms everything that Xu Fan sees in disguise. -S331A type lithography machine is brand new!

The two aspects verify each other, indicating that the problem is bigger.

The third reason is the charges on the upgrade bar, which can be described as scary!

It takes 85 million to upgrade one generation alone!

This has never happened before. Even the lithography machine that upgraded Esmore did not charge such a high price. Even if it was upgraded for three generations, how much was it charged at that time?

And this one, upgraded to three generations, even if it can manufacture a 14-nanometer chip, it can charge a terrifying 330 million.

Corresponding to the above two reasons, it is enough to see how big the problem is!

The problem is very big, or the one that has been confirmed!

A...

What he saw with his eyes was that there was no problem. Xu Fan could even be sure that the big island from the small island nation would not refuse when they asked for an inspection.

"Odashima-kun... We need to do a simple check. This time we have three engineers!" Lin Dashan also knew there was a problem, but he just went through the normal process.

"Can!""

Oshima smiled, did not refuse, and made a gesture generously: "Please!

This time!

Yi Xue led the team in person, but when he got the approval of others, he was not in a hurry. Instead, he glanced at his boss from the corner of his eye. What he got was the boss's first shaking his head, followed by a nod!

Shaking his head is a sign that there is a problem, which is a long-established password, and a nod at the back is a sign for them to go over and check!

After receiving such a signal from his own boss, he was naturally rude. He brought two R&D-specific robots forward. Their preparations were not generally sufficient. They even brought a toolbox. It was just a small toolbox that could bring tools are limited.

“nonono…”

Da Dao seemed very excited, stepped forward quickly, and directly blocked the way of Yi Xue and others: "Lin Jun... The lithography machine is a very precise device. I allow you to test it, but it is limited to opening the outer protective shell, and the inner Things do not allow disassembly inspection.

"Because that will damage the entire lithography machine, if you remove even a small part and reinstall it, it will make the lithography machine unusable, and it requires our company's engineering team to install and debug, which is very troublesome. !" Oshima murmured quickly, and the reason was very reasonable.

66.99

Yi Xue was a little angry and a little embarrassed. If he only opened the protective case, he would not be able to check anything at all. He got the boss's indication that this is a problematic lithography machine.

"..." Lin Dashan, the person in charge, was also silent, his eyes were always on Da Dao, but out of the corner of his eyes, he was looking at his own boss.

"Yes! 35

The corner of Xu Fan's mouth outlined a radian, and he said these two words with his lips. At this time, from the information he has obtained, he has already made a preliminary judgment. As for whether the judgment is accurate or not, it needs to wait for further verification. .

It is necessary to aggregate more information, and when the information he wants is aggregated, he can conclude that the problem is there.

And this information needs to be easy to learn. They disassemble the protective case for inspection and collect it.

"Be careful, don't damage other people's equipment!"

Lin Dashan plays the boss and the person in charge who was appointed this time, so he naturally has the authority to give instructions: "Be careful!"

"clear!

Yi Xue answered on behalf of the three-person team, looking very solemn, as if to say: We will be very careful!

Such a gesture!

Oshima was very satisfied, the corners of his eyes twitched, the corners of his mouth twitched, and in an instant, he soon returned to normal!

Just such a small expression and small action, in fact, has exposed more information!

He thought no one noticed!

But he was caught by Lin Dashan and Xu Fan who have been focusing on him!

This time I am more certain, no, it has been 100% certain from the beginning.

"Not in a hurry!

Xu Fan has always stood by Lin Dashan's side. At this moment, Odao and his help are all focusing on Yi Xue and the three of them. Will they notice them for a while? There is also a distance, as long as Speak in a low voice: "When they're done checking, you'll find another excuse to say we need to talk to the team, leave them alone and talk about it later!

"OK!"

"Let's do it first, after all, it's not the place to talk! 35

Xu Fan smiled lightly, with a playful smile: "If they want to play, let's play with him, and if they want to act, we also act with him, and we must act more professionally than them. As for who will kill the deer in the end, it depends on Whose means is better!

"Lin Dashan didn't say a word, he wanted to answer, but when Oshima turned his head, he immediately had a serious face, very serious, and he really had the style of a boss. The boss's reply.