Science and Technology Library

On the way to the lab, Chen Mo looked forward.

Chip design, including iC design, simulation, chip architecture and algorithm design, are all done independently by the ink girl. This is the first time that artificial intelligence has been designed so independently. If it is released, it will definitely cause a huge shock.

Chen Mo is looking forward to the use of chips designed by Moto.

Ink has designed a total of four chips, including intelligent robot chips, mobile phone chips, computer chips and the most important supercomputer chips. Now is the first chip verification, intelligent robot chip.

The superconducting chip comes out and will be installed on the intelligent robot first to improve the working efficiency of the intelligent robot. Chen Mo promised that the ink woman said to help her create a good-looking body, and the intelligent robot chip design was successful, and this matter should also be put on the agenda.

After entering the laboratory, Chen Mo saw that there were more than a dozen two-centimeter square chips arranged on the experimental bench. The chip of the intelligent robot is much larger than the chip of the computer because of the complicated and high-speed non-logic operation.

Chen Mo looked at the chip carefully. This is unpackaged, and it is still different from ordinary chips. The surface of the ordinary chip has a metallic copper-gold luster, but this is a crystal-like bright luster.

These unpackaged chips are all damaged chips.

The carrier of the chip is still high-purity polysilicon, and the circuit carried inside the chip is not a copper wire used as a common chip, but a silicon carbide having a normal temperature superconductor material.

This small chip is more than two hundred and sixty steps before and after, and more than one thousand processes are coming out, which is the crystallization of the highest information technology.

For these chips, it takes a lot of effort.

"The yield of wafer test is 74%, this is the packaged sample, the best one, the third is the worst." A robot took three plastic boxes from the clean laboratory and handed it to Chen Mo. .

The number of processors in each box is not equal. The first class of processors is the least, only twenty, the three types of processors are the most, and the specific number, Chen Mo has no way to count.

Three types of chips, like Intel's i3, i5, and i7 processors, are similarly classified.

The i3 processor is one or two CPu damaged in the chip, but it can still work. The i5 is the normal working of the chip, the frequency is not high, and the i7 is a processor made of chips with no problem at all. These chips are the final test stage. Classified.

The packaged chip, 4 cm square, is a bit larger than the computer's processor and looks very delicate.

"These chips can be used normally, and the circuit design is no problem. This is a test report with detailed data." Another robot handed the folder in hand to Chen Mo.

Get the test report, Chen Mo carefully read it again.

The power consumption of the chip is one-eighth of that of a common chip, and the speed of processing data is nearly ninety times faster. No wonder so many countries and laboratories are desperately studying the room temperature superconducting materials.

Even the worst three types of superconducting chips here, the performance is dozens of times more powerful than the known computer processors.

For computers, these materials are completely revolutionary.

This piece of chip, if released, means that the room temperature superconducting chip is available. The sensation brought by this little thing is definitely more crazy than the sensation brought by the seismograph.

Now a medium-sized computer consumes 10 kilowatts of electricity per hour. So superconducting computers made entirely of superconducting materials can work normally with only one dry battery. This is the horror of superconducting computers.

To make a robot with superconducting materials, you don't have to worry about using the battery too fast.

There are too many things involved, too big. Except for himself, no one knows the existence of superconducting materials at room temperature, and he dares not to announce them.

"Intelligent robotic chips, two more batches, and then test the supercomputer's chips." Chen Mo said in a test report.

At present, the most important task is the production of superconducting computers. Superconducting computers are the first technology he has to complete. There are too many technologies waiting for him to discover in the science and technology library.

The superconducting chip is not ready for mass production, because it is temporarily impossible to go on the market, only a batch of chip making robots is needed, and the robot can be upgraded.

Inside the lab of the office area.

A robot is quietly lying on the test bench, and various lines are connected to the test instrument. The robot is similar to the enchantress robot, and is more cool than the enchantress robot. It is the 2.0 version of the enchanting robot.

This is an upgraded version of the robot for mounting superconducting chips.

Install the superconducting chip into the robot, turn on the power, and the robot's eyes will light up. After ten seconds of no movement, the robot then sat up from the bench.

"Mer. Brother." What appears in the robot is the voice of the ink girl.

"How?" Chen Mo asked.

"The calculation and running speed is faster than before. My algorithm can run barely on this chip, the processor won't burn, but the board can be burned in less than half an hour, and the robot can only be controlled by commands." On the test bench, walk around in the lab.

“The board is not made of superconducting materials. When you make your body, use full superconducting materials,” says Chen Mo.

Now the procedure of the ink girl, and when it was first created, is two appearances.

In addition to the smart architecture is that skeleton, the other changes are great. The ink girl learns through the machine and constantly improves, like a child who grows up slowly.

So now the general processor, can not run the ink girl, can only accept her instructions.

On the 1st floor, the room temperature superconducting materials are continuously being synthesized, and small batch production has begun. The components of the superconducting computer are also being produced, and the information of the supercomputer is also sorted out by Chen Mo. As long as the chip test of the supercomputer is completed, the superconducting computer can be assembled.

The second generation of robots has come out, and the first generation of robots is also on the market.

Zhao Min put down the documents in his hands and left the office. The company just reorganized and some of the business is coordinating the handover, so there are relatively many recent things.

It was a bit of a surprise to Chen Mo’s sudden call.

Just entering Chen Mo's office, the newly painted robot immediately caught her attention. There is a clear difference between this robot and the previous robot.

Sitting on the sofa opposite Chen Mo, Zhao Min said: "Is this a new robot?"

"Yes, this is the second generation of robots, freshly baked." Chen Mo nodded.

"You summon me with a big summoning, there are important things." Zhao Min carefully looked at the new type of robot.

"What happened to the listing of robots?"

Upon hearing the listing of the robot, Zhao Min immediately came to the spirit: "The procedures have been completed long ago, the production batch number has been obtained, can be produced at any time, ready to go public?"

"Listing!" Chen Mo affirmed.

Zhao Min laughed. After the robot came out, she looked forward to the day of listing and kept waiting for Chen Mo.

The robot will be the first product released by their company in the new year.