Starting Off With A Blacksmith Workshop

Everyone in the live broadcast room also heard the huge roar of the engine,

The sound was continuous, not the usual sound of horseshoes.

[Cutting, this voice is okay! 】

[It's very majestic, I like this voice. 】

[We witnessed the birth of a radial engine. 】

[The anchor is planning to build an airplane? The star engines are all out! 】

[The B upstairs must be a newcomer. 】

······

The live broadcast room was already fried, and the mood in the workshop was almost the same.

After adding the accelerator, Li Zhenhua also calmed down, and returned to the computer where the data was displayed.

Looking at the data displayed above, he analyzed the data bit by bit, verifying the difference between the data and what he got in the virtual laboratory.

After a little bit of verification, sometimes pull the accelerator to the bottom, and sometimes release the accelerator, let him rotate at the lowest idle speed.

A linear graph of power output gradually appeared on the computer. From the graph, the power output is very stable.

Keeping all the data on the computer in his mind, he set his sights on the engine again.

He saw the temperature of the engine displayed directly in front of his eyes.

Looking at the temperature of the engine casing at this moment, the displayed temperature was only 80 degrees.

When such a temperature is loaded into the car, the temperature of the shell will definitely be lower after running, and the air cooling can fully meet the cooling problem of the engine.

The analytical eye made another contribution at this time, and saw that the vibration value was very small, and the operation was very stable at the lowest idle speed.

Even at the maximum throttle, the engine vibration value only has a small increase.

Seeing the data from these experiments, he was so excited right now that he couldn't calm down at all.

As far as the performance of the engine is concerned, after the real car is built, the vibration of the engine may not be felt at all during driving, and even if it is, it is slightly felt.

This vibration is much smoother than the three-cylinder Junqi that claims to be able to enter the desert, and there is no need to open the hood.

After the engine had been running for half an hour, he cut off the spark plug power supply to the engine,

The spark plugs were not firing and the engine stalled.

This time the test drive has come to an end, and the engine will be inspected later.

Check the condition of the engine oil, disassemble a cylinder to see how the cylinder wall is worn, after a series of inspections, the time has come to noon again.

After a whole morning of testing, the data obtained so far showed that the engine in front of them had fully met the design indicators.

The three of them who worked all morning sat on the ground around the engine in the middle.

"The whole morning just watched you test over there, and you also told us brothers how the engine is!"

Guo Shugui, a guy who broke his leg while playing with a car, finally couldn't help asking Li Zhenhua the question he was most concerned about.

He was sitting on the ground to rest, but when he heard Guo Shugui's question, he put the water glass in his hand on the ground,

Come back to the live broadcast computer and bring the main camera in front of them.

"Friends in the live broadcast room, everyone heard what my brother just asked,

Presumably you in front of the live broadcast room are also very puzzled!

Now I agree to say something, this engine is based on the current test situation,

It fully met the indicators I designed, and the speed, horsepower, torque, casing temperature, jitter amplitude, and combustion ratio, etc., were all qualified.

The engine displacement of this engine is that it can output a maximum of 71.9 horsepower, which is 0.9 horsepower higher than the index when I designed it.

Maybe some friends don’t know what 70 horsepower represents, so I will simply give an example,

Ricky Koukou knows that the horsepower of this car's engine is only 51.7 horsepower.

And the one in front of us has more than 20 horsepower more than Koukou.

Come to think of it, veterans, what a motivator this will be. "

Having said this, he paused for a while, turned to look at Guo Shugui,

At this moment, this ratio seems to have never seen the market before, even the engine is almost lying on the engine,

"Cracker, don't get so close, be careful not to burn your face!"

After reminding Guo Shugui, he turned his head around again.

"Everyone, don't learn it. If you are not careful, it may really disfigure you.

Next we're going to fire this engine up and set it aside for a maximum run time test,

We will add a new set of lenses for this test, please monitor and see how many hours the engine can continue to work.

In the afternoon, I plan to test the seven-cylinder model, which is the same as the one I just tested.

Tie Zi who feels bored can go out for a walk and see Miss Sister,

When you meet the top ones, you go first, and remember to tell me in the live broadcast room after you finish, and I will also go to watch. "

After finishing speaking, Li Zhenhua didn't care about the dynamics in the live broadcast room, turned around and kicked the fat man next to him,

This fat man was exhausted in the morning, he has been assisting Li Zhenhua in the test,

Carrying oil, lifting something, all these manual tasks are done by him.

"Fatty, get up, let's push the engine aside together and let him go through the test of time."

Liu Xiaodong reluctantly got up from the ground, Guo Shugui was also busy moving beside, the three of them pushed the engine under the new camera and ignited the engine.

The three of them finished this, went out to eat something, and continued to test the next engine after returning.

After a few days of busy ~www.wuxiamtl.com~ all the data in the engine test have reached the design index,

There are still a few items of data that cannot be tested in a short period of time, and these can be ignored.

Anyway, the two engines in the workshop are running, and the data has been collected.

The originally quiet workshop now has two more days of noise making machines,

You must know that the engine at this time is not equipped with a muffler, and the pure original sound, no matter how quiet the sound, is not so small.

Listening to these sounds, according to Li Zhenhua's plan, the following work should be welding the frame, but it was interrupted by this noise.

But at this moment, he was annoyed by the noise, and he was no longer excited when he heard the roar.

"Oh, digging, the sound is really loud. It seems that I have to get the muffler out first, or I will go crazy in this working environment."

He was the only one left in the workshop again, and Liu Xiaodong and Guo Shugui were busy with their own affairs.

Li Zhenhua also laid out the materials used to make the exhaust pipe in front of him.

The most conspicuous thing I saw was a large roll of thermally conductive carbon fiber and a bottle of curing agent.

That's right, the main material of the exhaust pipe he chose this time is carbon fiber, which is also chosen for the lightweight of the car body.

He put a lot of thought into the design of this muffler.

Everyone knows that the noise of this radial engine is relatively loud compared to ordinary motorcycles.

If the muffler is not done well, this motorcycle will definitely not meet the road standard.

In the end, it will inevitably become a street bombing tool for the will-o'-the-wisp boys. Of course, the will-o'-the-wisp boys should not be able to afford his car.

Starting to manufacture, the carbon fiber is slowly changing its shape in his hands.