Take Off My Aviation Era

　　Zhuang Jianye didn't speak, so Peng Chuan picked up the walkie-talkie and said, "Let's start."

Immediately, the workers in charge of operating the equipment started as required. A sound of mechanical rotation rang out. The metal columnar matrix of the flexible tooling equipment originally attached to the ground immediately made a 90-degree deflection along the slides on both sides. The gantry crane-like device slowly moves to the opposite processing surface.

There, two metal arms-like mechanical devices were already ready. When the wing parts were moved by the flexible tooling equipment, they came to the two straight mechanical arms. All the equipment stopped suddenly, as if time was frozen. It was normal, but the next moment the two mechanical arms roared, they brought the drill bits in front of them, just like the magic finger of King Kong in a martial arts novel, they pierced Guanghua's wing parts without hesitation.

Soon rows of drilling holes for riveting appeared in front of everyone. The speed was not too fast, but it was definitely not slow. With the regular movements of the mechanical arm and the falling metal fragments, there was a saying no. Out of the **** beauty.

Upon seeing this, Zhuang Jianye nodded slightly, and then listened to Peng Chuan saying: "Originally, we were going to make a one-time molding, but it was too difficult. We can't do fine control. Fortunately, there is a warehouse in the zero degree factory. We took advantage of a few robotic arms made in the United States, and the effect was really good."

Hearing that it was the good stuff that was taken out of the scattered and broken batch of H company, Zhuang Jianye was not surprised. Although the mess in the batch was maddening, there were so many good things in it. You will find something that can be used.

Needless to say, this is the case with the robotic arm being drilled. In the 1980s, this thing was called a robotic arm, and in a few years it will be called an industrial robot. With the development of microelectronics and computer technology, industrial robots Sensitivity and accuracy will be higher and higher.

　　 is a popular product that is urgently needed in almost all industrial fields. Zhuang Jianye believes that Peng Chuan and the others should see the value of this thing after the integration and transformation of the equipment, and they may have begun research.

Sure enough, I heard Peng Chuan continue to say: "It's a pity that we have only compiled six sets of such robotic arms. Two sets are used here for the drilling of general aircraft parts. The other two are converted into automatic riveting machines and placed In the No. 3 workshop on the opposite side, it is matched with another small flexible tooling equipment to form a fully automated riveting complete set of equipment for conventional riveting work.

　　 The last two sets are placed in the final assembly shop, in order to cooperate with the old Zhou’s laser precision measurement system to form our new-style final assembly line. "

After speaking, he sighed, his expression was as if he was kicked out of the bedroom by his wife, with helplessness in loneliness: "It's a pity, this thing is really too few, if we can have six more sets, then our The final assembly line can really form semi-automatic production, and the efficiency can be increased by at least five times.

If you look at the equipment in front of you, you will know that before we had to process such a wing riveting hole, how could it take more than a dozen workers to work on it for three or four days before it can be taken down. Now, it only takes three Personally, it can be easily completed in less than an hour, and the accuracy can be controlled within plus or minus 0.03mm, which can be said to be a leap forward. "

　　 "Well~~" Zhuang Jianye nodded, and then asked: "Then what are your considerations?"

"In my opinion, we can't get so many robotic arms in the short term, but we can try to import the one-step part and then apply it to our production line after transformation. In the long run, I think we should build on our own basis." Peng Chuan said without hesitation.

　　 "This idea is good. In this way, you can form a budget as soon as possible, and get it for discussion at the meeting next week." Zhuang Jianye responded very simply.

　　 Hearing these words, Peng Chuan is not surprised. After all, he and Zhuang Jianye are old friends who have been together from the Yonghong factory, and they are very familiar with each other.

　　 But Zhou Lei on the side opened his eyes wide in surprise. He never expected that this matter would be so decided, yes, it was decided, because Zhuang Jianye was not talking about a plan, but a budget.

　　What is a budget? No intention to invest, what budget?

　　 Of course, this is not Zhou Lei's most surprised. What surprised him was Zhuang Jianye's control over the Ascendas Factory. The robotic arm was not a trivial matter. He decided to decide by himself, as if he didn't even have any constraints.

　　 There are quite a few state-owned enterprises that Zhou Lei has contact with, but like Tengfei Factory, a leader who can fully implement his will from top to bottom has never seen it.

　　 Even if you are a strong factory leader, there are at least one or two people around you who sing and stab the knife. Even if they don’t, the mother-in-laws above are the ones who are easy to serve? A corporate leader who is not good at increasing points and turning in profits, wearing small shoes behind his back, can also toss in misery.

　　 You can see Zhuang Jianye, as if none of these shackles exist, and the three views of freedom are somewhat subverted.

This is Zhou Lei’s new addition to the big system of Tengfei Factory. He was not clear about Zhuang Jianye in the past. If he knew how the man who surprised him was tossing about it, he would know why there were no constraints in the factory. It was very simple and could be. They were all taken away by Zhuang Jianye, and the rest were professionals like Lin Guanghua and Peng Chuan who were devoted to technology.

　　 Their eyes are only on the development of the project at hand, and then they look forward to transforming it into a product and obtaining long-term benefits. It is practical and guaranteed, and there is no need to worry about it. Who cares how Zhuang Jianye does it, as long as he can make money.

As for the mother-in-law above, just look at the faces of the leaders who came to participate in the signing ceremony of the joint venture. You can see that Zhuang Jianye is really unsuccessful. He adds profits and wears small shoes. As long as he dares to do this, who will be sad and suffer. Hard to say.

　　 Coupled with holding the external channels in your hand, you can get the seemingly unremarkable picture above ~www.ltnovel.com~ and it has become a wonderful existence today.

　　 "Old Zhou~~Old Zhou?"

Just as Zhou Lei thought about how Zhuang Jianye did it, and then began to suspect that the words that Qin Hongjun had told him that Zhuang Jianye might not be able to grow, he heard Zhuang Jianye's words in his ears, Zhou Lei hurriedly got excited and replied with a smile: " You said, Director Zhuang."

"Oh, I mean, don't the equipment on your side involve some imported components, but also make a budget together. Now these workshops have to install this system, and you need to give a specific number. "

　　 Zhou Lei nodded as soon as he heard that this was the case, "Okay, I'll get it when I go back, uh...when do you want it?"

　　 "In three days, this matter can't be delayed. Oh, yes, if the components are in place, can the installation and debugging of these workshops be completed in half a month?" Zhuang Jianye asked again.

　　 Zhou Lei frowned when he heard the words, and immediately figured it out in his heart: "It's a little tight for half a month, but it's almost the same, I will try my best."

"That's it, that's it..." Zhuang Jianye nodded, but before he could continue speaking, assistant Xiao Qin ran over and said a few words in his ear. Zhuang Jianye's expression suddenly changed, and Peng Chuan saw it. Can't help asking: "What's the matter?"

"It's not a big problem. It's not as important as your production here. You don't have to worry about it. Except for the D-40 gas turbine power, which is the efficiency of the production line on your side, there is nothing else to worry about. Okay, Lao Lin is still there. Wait for me, I will pass first."

　　Zhuang Jianye said apologetic farewells to Peng Chuan and Zhou Lei, and took Xiao Qin out of the workshop, and immediately asked: "Why is there no engine in Yunwu?"