Wizard: I Brought the Wrong System

Chapter 127: Jiancheng

"Witcher: I brought the wrong system (

It’s just a little bit, take a chapter first, it’s ready right away, click on the book friends, and refresh it later!

When Yarrow came to smelt the iron again, he suddenly realized that he had done a stupid thing.

The melting point of iron is higher than that of silver, and the molten iron will melt with the silver core that was originally outlined!

Do the steel sword body first, and then pour the silver liquid?

How to make the hollow part in the middle of the steel sword body?

What the magical hand builds is a palm structure, and it can't be hollowed out!

Yaluo, who couldn't think of a good solution, had to give up the integrated structure, make it into a folded shape, and then carve the hollow shape into it.

However, for a long sword made in this way, the hardness of the opening will definitely have an effect.

Yarrow’s approach is to make the openings into alternating teeth. When closed, the teeth structures at the opening will fit into each other like a zipper, so that the cut will not have a direct impact on the notch.

Carve these details, and then complete the third important structure of the fire sword.

The heat dissipation and steam release structure on the hilt.

The steel body on the surface of the sword hilt depicts a row of concave cylindrical hollows. These hollow structures will walk in the vacant position of the nail cap and absorb the excess heat of the palm.

The key is that the sword grid in the middle needs a small mechanism to release the stored steam, and the carvings in these positions need to be extra fine.

Yarrow sculpted carefully for a long time, and even if he accidentally made a mistake, he could gradually soften it with thermal fusion and re-modify it.

Yarrow, who had enough chances of trial and error, finally sculpted it successfully.

In this way, the overall structure is considered complete.

Yaluo put the silver core into the spread steel sword body, and then drove the ‘hot-melt technique’ to close the steel body sword hard.

Then take out some stones and place them in the place where the "hot molten stone" is left. All the silver cores in the middle are blocked, and then the whole is heated. Hit with a hammer to fill in any gaps in the middle. Reality.

Finally, it is heated and quenched.

"laugh--!"

A little bit of sparks came up with a puff of blue smoke, and the stench of oily gas filled the entire laboratory.

The bright red sword gradually darkened into black and blue, and Yarrow opened the door of the laboratory. After all the embarrassing aura had dissipated, he took out the inconspicuous long sword from the quenching liquid.

The first is to remove the broken stones, then fit the cut hot molten stone into it, and then take it to the grindstone for continuous grinding to grind the surface neatly, and the sword blade to be sharpened.

With these procedures, the sword body gradually shines and becomes brighter and brighter.

By now, this blazing long sword is actually almost forged, but the hollow pipe left by the hilt needs to be filled with some water-locking things.

The first thing that Yaluo thought of was the "super absorbent resin" in the previous life. This is actually an artificial material. It is used for artificial snow in many film and television works. It is still used for diapers, ashtray addition, and decompression toys. And so on.

There are network molecular chains in the molecular structure of'super absorbent resin'. The water absorbing agent will electrolyze immediately after encountering water and dissociate into positively and negatively charged ions. This kind of positively and negatively charged ions and water have a strong Affinity, so that it has extremely strong water absorption and water retention, can quickly absorb water hundreds or even thousands of times heavier than itself, and swell into a hydrogel after absorbing water.

Fill the sword hilt with this material, and use paper as the spacer material to ensure that liquid water will not rush out when the steam release structure is opened.

But... this is man-made material after all, Yarrow can't make it!

In fact, like flour, it has good water storage, but the hilt of Yarrow will have subsequent heat. If you use flour, you can eat cooked food quickly, and the so-called water storage will naturally disappear.

So what Yarrow chose was a kind of shell powder in this world.

The nature of this shell powder is somewhat similar to that of ‘super absorbent resin’. It is a common material used to remove moisture and has strong water absorption.

Pour these shell powder into it carefully, and then add pure water to it with the ‘water extraction technique’, and the fire sword can be considered successful.

...

After taking a short rest and eating something casually, Yarrow then began to study the ‘airship power core’ that Bosco gave.

Then... I don't understand!

It is densely painted with all kinds of magic patterns, which is not something that a beginner like Yarrow can understand!

However, these magic patterns also have some regional divisions. Yarrow tried to input magic power. After several attempts, he finally found the correct place for magic power input.

In fact, this is also easy to understand. Any appliance that wants to receive external forces will naturally have a port connected to the outside world. It is like a line on a toy. This line is what Yaluo is looking for~www.wuxiamtl.com~ is determined. After the input terminal, he carefully input a little magic power, the'airship power core' buzzed, and a gap at the outer end of the metal ball gradually rotated half a circle.

It seems that the magic is too little and the driving effect is too bad.

But Yarrow's goal was achieved, and he determined another component, the position of rotation, which was the power output.

...

In this way, Yarrow gradually cracked the structure on the metal ball by experimenting little by little.

The metal sphere was not sealed, and all the magic patterns appeared on the surface. After confirming more and more structures, Yarrow gradually found the structures he wanted.

First, the magic absorption structure.

This is the refueling port of the ‘airship power core’, which can also be understood as the battery part of this thing.

Second, the kinetic energy conversion structure.

This magic pattern, after the input of magic power, will generate rotating wind.

Third, the kinetic energy control system.

This is better understood, it is the system of adjustment and control.

After determining the three magic pattern structures, Yarrow finally walked out of the room and went to the corner of life street to buy some magic pattern ink.